** Our Phone Numbers have changed - Sales: 01225 767 129 / Accounts: 01225 781 991 / Support: 01225 781 990 **

Our Phone Numbers have changed - Sales: 01225 767 129 / Accounts: 01225 781 991 / Support: 01225 781 990

Frequently Asked Questions - Daitem Analogue Intercom

FAQs - Daitem Analogue Intercom

Daitem Analogue Intercom

Single Dwelling:

  1. Press the little white button inside the controller (bottom right area on a silver back plate)
  2. Press the call button on the call point (bottom right button on the unit outside of your gate/door)
  3. D5131GB - press and hold the top left and top right buttons at the same time for 10 seconds max.

If you hear an audible beep from the handset then pairing has been successful.

If no beep is heard then repeat from step 1, if you still hear no beep this would suggest a faulty controller or handset and either could need replacing.

 

Multi Call:

  1. Set the 'Pilot Controller' DIP switches according to the radio repeater you want to pair the handset against
  2. Press the little white button in the controller
  3. Press the call button on the call point that's to be paired to the handset
  4. Press and hold the top left and top right buttons at the same time for 10 seconds max.

If you hear an audible beep from the handset then pairing has been successful.

If no beep is heard then repeat from step 2, if you still hear no beep this would suggest a faulty controller or handset and either could need replacing.

Newsletter Signup

Go To Top