Frequently Asked Questions - Daitem e-Nova

FAQs - Daitem e-Nova

Daitem e-Nova wireless alarm system.

The Daitem e-Nova can detect:

  • attempts to open
  • attempts to remove
  • if the phone line has been cut
  • attempts to hack radio codes
  • attempts to jam radio frequencies

All of the above will cause a temper alarm to be activated.


Prior to pairing a programming code needs to be entered to the keypad to inform that it is being linked to the old alarm system.

Put both keypad and alarm controller into programming mode.

  1. (master code)#2##
  2. (installer code)#3##

Enter *32*0** into the keypad


  1. *# on the alarm controller
  2. Press and hold 'OFF' on the keypad (max of 10 s)
  3. Espace will announce 'beep, control unit no.'
  4. Press 'OFF' on the keypad again.
  5. Espace will announce 'beep, off, control unit no.'
  6. keypad will also emit 'beep'

Pairing is complete


Go To Top